SPECIFICATION OF PRODUCT
SPECIFICATION OF PRODUCT
OUR VIDEOS
OUR VIDEOS
NANO COATING SHOWER CABIN
Protection from limescale and water
Nano coating designed for glass shower cabins. It forms a thin hydrophobic layer that repels water and dirt, preventing hard water stains, soap deposits, and other contaminants from accumulating on the surface. Treated glass retains its original appearance, remaining perfectly clear.
CLEANER SURFACE PREPARE
Effectively cleans the surface
Concentrated cleaner for surface preparation before applying nano coatings. Effectively removes grease residue, fingerprint marks, and other minor contaminants, leaving the surface perfectly clean and dry. Suitable to be used on glass, plastic, metal, ceramic, and other non-wetting materials.
USAGE
PREPARE THE SURFACE WITH SURFACE SCRUB CLEANER
- Replace the bottle cap with the spray nozzle included in the set.
- Shake the product well for at least 20 seconds before every usage.
- Spray it evenly on the surface.
- Rub the cleaner into the surface thoroughly with the blue cleaning cloth, going over the same spot a few times.
- Wash the surface carefully with water, making sure there is no residue left.
- Dry off the excess water and allow the surface to dry completely before applying the nano coating.
APPLY SHOWER CABIN NANO COATING
- Ensure the surface is clean, dry, and grease-free.
- Apply 6-8 drops of nano coating on the grey application cloth.
- Buff the coating into the glass in a circular motion. Apply additional coating on the application cloth as necessary. Ensure the surface is fully coated. Do not coat area larger than 50×50 cm at once. Wipe off any coating that gets on other surfaces.
- Allow the coating to cure for 10 minutes. If the product has been applied correctly, there should be a white haze visible on the surface.
- Polish the surface with the soft microfiber cloth (included in the set) until the glass appears clear. Ensure there are no spots left unpolished.
- Avoid contact with water for at least 4 hours.
CAUTION!
- Apply Shower Cabin nano coating in a well-ventilated area.
- Do not apply in direct sun or on hot surface. Proper application temperature: +10 ˚C to +25 ˚C. Do not apply the coating in temperatures above +30 ˚C.
- Clean the surface with a damp cloth. Do not use any chemical cleaners.
- There is no visual difference before and after application; the coating is completely transparent and invisible.
Find more products for the home here / If you have any questions about the product, please contact us
Hendlex Shower Cabin protection set is designed to be used on glass shower cabins. Included coating repels water and dirt, preventing hard water stains and the accumulation of limescale, soap scum, or other grime. Treated glass remains visually clear and aesthetically pleasing with minimal effort. Harsh chemical cleaning agents are not necessary, wet microfiber cloth is sufficient for cleaning.